China 20-25 ton Excavator 12m 14m 18m Three Sections Telescopic Boom Arm with shell bucket for PC ZX HD SY CAT

Catalogue ZH excavator boom arm.pdf

• Outer arm cylinder: small arm synchronous steel wire; synchronous steel wire rope fixed seat; synchronous pulley group; retractable pulley; retractable oil cylinder; retractable steel wire rope group; retractable oil cylinder iron pipe; clamp iron pipe; pulley rail; fixed ear seat, fixed ear seat connection rod.
• Middle arm barrel: clamp pipe hose; clamp pipe synchronous pulley; small arm barrel synchronous pulley; buffer vibration glue; and internal middle arm synchronous for fixed pulley.
• Small arm tube: horse head; clamp pipe; expansion steel wire fixed ear seat; small arm synchronous steel wire rope fixed ear seat.

• Working condition for excavator telescopic long boom arm:

  Mainly used for forestry operations(with grabber) and load&transport soft mud(with shell bucket/standard bucket)

Arm barrel using high strength manganese plate, pulley group all using steel, bearings using Luoyang bearing, all wire rope using multiple wire rope; optimize arm barrel design, the expansion arm need not replace the wire rope and pulley.

First flashlight,oil pipelines are hidden inside the body, which ensures them will not explose during working.

Second flashlight, inner part of the arm barrel is double-sleeve, reduce greatly steel pipe shaking and joint loosening during frequent go and back,prevent oil leakage problems.

The three-stage pull arm(with grabber) is aimed at a 12-15 ton machine for modification, the length of the modification is from 21-28 meters long, matched with hydraulic rotating wooden gripper, it is mainly used for carrying out short-distance timber transport operations down or up the hillside. Basically, the scope of operation ranges from 5 to 28 meters, and the expansion time is basically kept at about 15 seconds for expansion and contraction, mainly for eucalyptus, pine and other economic forest, grab the weight of 1-2 tons below, but no limits of tree length.

The three-stage telescopic arm(with bucket) is used to load and transport sand or soft mud.

Sumilation parameters of ZH Excavator Telescopic Arm

GOOD SERVICE:

1. Online support within 24 hours.

2. Appointment video technical support.

(Our engineers have focused on excavator boom and attachment over 10 years)

3. Long excavator boom shall be two/three jointed pcs to make it fittable into container to save shipping cost.

WARRANTY

1 year for long reach boom, 180 days for cylinder and linkage, 90 days for bucket.

1. Long reach excavator boom

2. Excavator telescopic boom

3. Demolition boom

4. Excavator rock bucket

5. Excavator tilting bucket

6. Hydraulic grabs for excavators

​

Please feel free to contact Aria directly!
Whatsapp/Wechat:+86 13822325403
Email:excavatorlongarm@gmail.com